Flexform™ Deep Draw Presses for versatile, economical low-volume sheet metal hydroforming
Today, the technology is a preferred method for economical low-volume part fabrication, particularly for the forming of tough alloys for jet engine components.Quintus Technologies is also highly respected for its skill in the fabrication process analysis, the forming process optimization, innovative tool design, systematic project management, and on-site technical support.Quintus offers a line of standard deep-draw press models with forming area/diameter ranging from 800 mm (31.5 in) to 1100 mm (43.3 in). Pressure typically 800 bar (11,600 psi). The cycle time depends on the tool size and the pressure level required, but normally ranges from 30 seconds to two minutes.
Pressure typically 800 bar (11,600 psi).
The cycle time is depending on the tool size and the pressure level required, but normally range from 30 seconds to two minutes.
Tray diameter ranging from 800 mm (31.5 in) to 1100 mm (43.3 in).
Quintus offers a line of standard deep-draw press models with forming area/diameter ranging from 800 mm (31.5 in) to 1100 mm (43.3 in).
Product range
QFM 0.8-800
QFM 0.8-800
Versatile press for complex and deep parts
Max blank diameter: 775 mm / 30.5 inch
Max draw depth: 250 mm / 9.8 inch
Max punch diameter: 600 mm / 23.6 inch
Download brochure Max blank diameter: 775 mm / 30.5 inch
Max draw depth: 250 mm / 9.8 inch
Max punch diameter: 600 mm / 23.6 inch
QFM 1.1-800
QFM 1.1-800
Ready for larger deep parts
Max blank diameter: 1,095 mm / 43.1 inch
Max draw depth: 254 mm / 10.0 inch
Max punch diameter: 900 mm / 35.4 inch
Download brochure Max blank diameter: 1,095 mm / 43.1 inch
Max draw depth: 254 mm / 10.0 inch
Max punch diameter: 900 mm / 35.4 inch
